2t.jpg (23653 bytes)


CERAMIC PTC THERMISTORS : SPECIALTY HEATING APPLICATIONS

SPECIALTY PTC HEATING THERMISTORS
PTC Thermistors for controlled chemical release PTC Thermistors for level/icing indication
PTC thermistors can be used to heat or vaporize chemical
liquids with narrow functional temperature range to prevent
overheating and provide controlled release of the aroma or
therapeutic agents.
PTC thermistors can be used in conjunction with
appropriate alarm or relay switch circuits to indicate
liquid overflow in holding tanks or the onset of icing
conditions. The thermistors' rapid change in resistance
corresponding to changes in the ambient is utilized to
indicate a change in the normal condition.



PTC Thermistors for Bimetal Thermostal PTC Thermistors for preheating Fluorescent Lamp
Heating Coil
A PTC thermistor can be positioned next to a bimetal
switch in parallel connection to sustain an "open" circuit
configuration upon detection of a fault condition. The circuit
will remain open until direct operator intervention to correct
the fault condition. Both rectangular and circular thermistors
are available.
A PTC thermistor can be connected in parallel with the
resonant capacitor in fluorescent lamp circuit to
preheat the lamp heating coil, thus extending the lamp
service life.



Surface Mount Device (SMD) Thermistors Flexible Heating Liner
Designed as the heat liner for heating pad, heating
vest, and other medical & therapeutic heating
applications.
Features cotton based fabrics and surface mount
  PTC thermistors.
Tailored temperature according to specific
  heating requirement.
SMD formatted PTC thermistors are used in mounting
procedures where the use of traditional double-plated
thermistors are impractical. The SMD PTC thermistors are
available in various shape, dimensions, and electrical
/thermal specifications for heating and controlling
applications.
RATED VOLTAGE : 3-24V
SURFACE TEMPERATURE : 30-50C
 


2com.jpg (7915 bytes)